New Items

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3" 80-100ml - MTN: 2.4-3.0" 100-125ml

You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 63 - 66 degrees

Shimano Tourney CS-HG200-7 7-speed cassette Combinations: - 12 – 28T: 12-14-16-18-21-24-28T (bm) - 12 – 32T: 12-14-16-18-21-26-32T (bp)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area. The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits. - Diameter: Avg. 30mm - Weight: 90g/pair - Width: 133.5mm - Durometer: 25A Happy Camper Compound - Clamp Style: Closed End, single clamp

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.

Look up. If you're lucky enough to be outside, you'll have the sun shining brightly down upon you. Now touch the top of your head. Yes, this susceptible portion of your body is being constantly berated by that sun above. Over time, this could lead to some issues, which is why we developed our Deflect UV Cycling Cap. It's not a substitution for sunscreen, per say, but it will help combat the harmful effects of ultraviolet rays. Now, it's important to note that we didn't make this cap out of tinfoil, meaning that it's not a cure-all bit of snake oil. It does, however, serve up a UV 50+ level of protection, which is more than your hair or helmet are offering. Add to this the obvious benefit of the fine-as-silk VaporRize fabric blocking sweat from trickling down into your eyes, plus the fact that this lightweight material does is actually remarkably cooling, and you're looking at a smart solution to your summer riding. Stay protected, stay seen. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Designed to be worn under a helmet, which minimizes bulk and ensures that your helmet's fit and position won't be compromised. - Even finer than silk, VaporRize microdenier fabric delivers unparalleled moisture transfer and UV protection. - Fabric Content: 100% Polyester

These simple rear pegs are the easiest solution for passenger footrests. XL 100mm length is large enough for passenger feet of all sizes. **For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Designed for frictionless compatibility with the Haul ST and up to 2 pairs on Haul LT. - 100mm long. - Installation requires tools (not included). *Not compatible with Rear Pannier adapters on the Haul ST due to shared mounting location.

The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - Carrier plate for rear racks that are not MIK ready. - Adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

Eliminate oil and dirt from your drivetrain in 3-5 minutes and watch the cleaner foam to a purplish-red color as in encapsulates and removes that oil and dirt. Eliminates brake squeal and will not attack wax on paint or drivetrain! - Ecapsulates and removes oils and grease - 16oz spray bottle - Cinnamon scent - Clean Rinsing

The updated Roadsport tire features one of our classic, most versatile tread patterns paired with the bead to bead protection of our premium Endurant casing. This upgrade gives the tire increased speed, grip and durability, all in a lighter weight package. We also updated the rubber with a new, extra-grippy compound that provides safe and predictable handling in a variety of conditions. So, it's no surprise that it has already become a Specialized employee favorite. - 27 x 1-1/4", psi 85-95, approximate weight 545g - Bead: Wire - Casing: 60 TPI - Compound: 60a - Flat Protection: Endurant

- Lock Type: Key - Thickness: 5mm - Lock Size: 85cm (2.8 feet) - Bracket: No

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

FL2.0 stems are designed to suit the more price conscious road or mountain biker. The stems are 3D forged from an advanced 6061 alloy to achieve the perfect balance of strength, stiffness, and weight, while the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. FEATURES - Designed for mountain and road use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - incl stem topcap and bolt - Lengths: 50-90mm - Angle: 6°

With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)

CN-HG701-11 Super Narrow HG-X11 Chain (11-speed) FEATURE - Directional 11-speed chain - More efficient and silent, less maintenance - MTB, Road, E-BIKE 11-speed compatible - Reinforced chain for E-BIKE use BENEFIT - Smooth and reliable shifting performance - Weight: 257g (116 Links)

Rugged durability comes naturally to the Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. Available in three different tooth counts, there is ample room to refine and customize your bike’s feel. - 8 Bolt direct mount - 30-38T range and +3mm offset variants - Compatible with T-Type chains

With a focus on reduced weight and cross-country tuned stopping power, the SLX BL-M7100 levers provide intuitive modulation so that you can explore your limits with confidence. They feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup

This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum

- Links (links): 136 - Defined Color: Silver - Color: Silver - Designed for ebike: Yes

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade

Attach this handy multi-tool to your Specialized SWAT-equipped water bottle cage (sold separately) and hit the trails secure in the knowledge that your tools are close at hand. The tool features hardened steel bits with an anti-rust coating and the plastic tool cradle holds securely and rattle-free thanks to the two attachment points.

What's better than ripping down the mountain, your riding absolutely on point? Staying plenty cool while doing it. Our new Trail Air Short Sleeve jersey uses VaporRize, a super-lightweight, breathable fabric, that keeps you cool while feeling comfortable against your skin and protecting you from ultraviolet rays and trailside foliage. - Crew neck collar keeps things casual and comfortable. - Deflect UV 30 protects your skin from harmful, ultraviolet rays. - Fabric Content: Knit 87% Polyester, 13% Spandex - VaporRize fabric is made from our most breathable, lightweight fabric that uses a Recycled Polyester blend to create its superior wicking ability. - Women's-Specific Regular Mountain Bike Fit is generous and comfortable.

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

The GX Eagle Transmission (T-Type) chain is the strongest we have ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top. In addition to this shape maximizing shifting performance and upgrading the aesthetics of any bike, it is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength. - Strongest SRAM chain ever. Specifically engineered for Eagle Transmission. - Flat top profile, unbelievable shifting performance, game-changing aesthetics. - Solid pins, fully approved for E-MTB use

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

Jobst Brandt was an important figure in Tom Ritchey's life. Along with Tom's father, who was also a cyclist, Jobst was an important mentor for Tom - faithfully sharing his vast engineering wisdom while also actively influencing Tom's riding. Bound only to the thrill of experience and exploration, for decades Jobst's and Tom's tires rode over more than a few different surfaces on any given ride. It's these adventures with Jobst that helped inspire the Alpine JB tire. This unique bicycle tire is built to ride wherever your two-wheeled journeys may take you. It rolls beautifully on all-day rides along smooth country roads, yet it has enough tread to gracefully navigate roads with minimal municipal maintenance or long stretches of gritty gravel. The Alpine JB enjoys a 120 TPI casing, is tubeless-ready and employs the unique VFA tread design - a pattern that's mostly recessed in the rubber of the tire, rather than relying on protruding knobs more commonly found on such tires. Thanks to the inverse tread, rolling resistance is smoother compared to traditional knobby tires, yet grip and confidence remain inherent features. An added benefit is that the Alpine JB is more durable because there are no knobs to wear down. - Tubeless-ready (only 35c) - VFA tread design - Stronghold Casing - 120 TPI

Shimano Deore M6000 Series 10-speed cassette. - Cogs: 11-13-15-17-19-21-24-28-32-36T

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

When you're flying down that gnarly overgrown trail, the Flexair Arcadia Jersey has got you covered, bringing some legendary Fox energy and performance to your ride with a design that looks as fast as it feels. With its coveted Flexair breathability and TruDri sweat-wicking fabric to keep you cool and dry, it also boasts construction details that'll ensure total mobility to dodge on a dime. Should you mistime your dodge, the abrasion-resistant sleeves and panels on the shoulder will guard your limbs against those errant trail flings.

Finding the perfect trail jersey is often a struggle but with our Trail Jerseys, we believe we've hit the mark. The secret sauce comes from the MiniR® fabric that reflects the sun to help keep you cool yet is plenty tough for the rigors and abuse that comes with trail riding. Not stopping there, we employed a casual style so you'll feel right at home on the mountain and then grabbing some grub on the way home. - MiniR® is a trademarked performance fabric, made from an exclusive yarn technology that reflects the sun’s rays to keep the wearer cool. It has a high UPF rating to provide longer sun protection for the skin. - UV 50+ protects you from the sun's harmful rays. - Crew neck collar keeps things casual and comfortable. - Relaxed fit is unrestricting to easily accommodate chest and elbow pads. - Fabric Content: 80% Polyester, 14% Cotton, 6% Spandex

Aluminum

With all the comfort of your favorite t-shirt paired with all the performance qualities of technical fabric, the Ranger TruDri Jersey lives to keep you cool on the trail. Constructed from TruDri fabrics designed to wick sweat away from your body as you ride, plus Jacquard detail for added ventilation, this best-value performance jersey looks great both on and off the bike. Tailored with a mountain bike fit, including a drop tail panel to offer coverage as you move around on your bike, it'll fast become your new favorite jersey for rides with your crew.

The Fast Trak Control 2Bliss Ready T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The Control casing is our light and durable do it all XC construction. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 29 x 2.35", PSI 25-50, approximate weight 715g

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Shimano CN-M9100 features an extended inner link plate that connects seamlessly with chainring teeth for highly efficient drivetrain performance. Its design offers a reduction in natural vibrations normally caused by the inner and outer chain plates rolling onto the chainring. It provides better chain engagement, stronger retention, and smoother pedaling. - Enhancements to shifting performance - Easy connect - Non-reusable - Smoother driving even over bumpy terrain - Compatible with Shimano Quick Link SM-CN910-12 - This chain meets durability requirements for E-MTB applications

A few years back we started playing around with wider bars on our mountain bikes. Trendy? Yes. Beneficial? Absolutely. It wasn't simply the idea to go big, but a deeper look at the geometry of a mountain bike. Through this, we discovered that wider bars had a few killer benefits: more stability, further control, and extra comfort.  As we began designing the Coast Drop Bar, these lessons of the wide MTB bar intrigued us. Does a wider drop-bar provide extra stability and control? Why yes, yes it does. And let's chat comfort—the combination of a wider bar with a shorter stem and shallower drop provides ergonomic relief to the wrists and neck.  These are bars that you can pump while sprinting, drop into while cruising, and handle the hoods with agility and ease. Now, shape and ergonomics aren't the only important things—material is key. We opted for a 6061 alloy to control vibrations while remaining light and nimble. Like a ski with a snappy core that pops and carves at the slightest intention, these bars use the unique dimensions and ideal material to give you playful freedom. Like any good burrito…width is important. - Dual-finish sandblast/polished black anodized - 65mm Reach - Works with shallow drop and exaggerated flare to make switching body position easy - 105mm Drop - Shallow Drop for when aero isn't everything and comfort is - 20° Flare - Combo of shallow drop and 20° flare provides more wrist comfort while moving back and forth between grips and hoods

The new Flexair Ascent Short Sleeve Jersey takes everything you love about the booming gravel and down-country scene and kicks up the performance and technology to match that energy. Constructed using moisture-wicking fabric, it's got maximum cooling on its mind and is our most aerodynamic and closest-to-body fit - perfect for going as fast as humanly possible on any trail. The carvico rear yoke bumps up the abrasion resistance, while the lightweight bonded hem, neck, and sleeveless arm openings reduce chaffing. Designed with lightweight, versatile, and breathable materials, and constructed with comfort top of mind, the new Ascent Collection blurs the lines between trail, adventure, and pure-XC to deliver premium performance.

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

This race-inspired design is known for its incredible fit and tremendous value. It has many similar features to the S-Works Prevail, like the Tri-Fix webbing system and 4th Dimension Cooling, granting the Propero III incredible performance at a more attainable price. - MIPS-equipped. - Easy-adjust, HairPort FSL II fit system with four height positions and micro-adjustable dial. - 4th Dimension Cooling System with Mega Mouthport for enhanced comfort. - Composite matrix internal reinforcement allows larger vents for greater cooling. - Soft 4X DryLite webbing material won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

This Hillbilly MTB tire likes it raw. Gravity-focused, excelling in steep, slippery, loose, and wet conditions in the continental north, the all-new Hillbilly is designed specifically to find traction in shifty natural terrain and bring confidence and control to the unpredictable wild. The new mountain bike tire tread pattern features an aggressive tread with deep center knobs and high-volume shoulder blocks to bite through loose soil when cornering. Block-in-block transition knobs reinforce the tire structure, aid traction, and lower rolling resistance, from plowing deep loam to railing rock slabs and charging over slippery roots. Specialized’s exclusive Sticky Fast T9 rubber compound elevates the Hillbilly’s traction, enabling it to stick everywhere, even in the greasiest conditions. In addition to its ability to grip in slippery situations, our T9 compound is formulated to bring just the right amount of damping to the backwoods party, reducing tire bounce and deflection to enhance stability and control in challenging conditions. This tubeless-ready trail tire is available in either GRID Trail or GRID Gravity casing, covering trail, all-mountain, enduro, and downhill. GRID Trail’s bead-to-bead protection and stability make it an excellent choice for aggressive riding in rough conditions. GRID Gravity is a burly, two-ply construction designed for durability and puncture protection in extreme conditions, offering incredible strength and exceptional tire stability when loaded hard into corners and compressed into jump faces. Just add sealant as the Hillbilly is a 2Bliss ready clincher for easy mounting and inflation with or without tubes. - Large block-in-block shoulder knobs for supported cornering. - Spike center knobs to dig in and find traction over loose terrain. - High-damping GRIPTON T9 compound reduces terrain-induced chatter, rebounds slowly, and has extreme grip in all conditions. - GRID Trail Casing: 60 TPI, tough MTB trail construction with additional bead-to-bead protection for exceptional puncture resistance, sidewall stiffness, and stability. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures. - GRID Trail 27.5x2.4; psi 25-50, approximate weight 985g. - GRID Trail 29x2.4; psi 25-50, approximate weight 1070g.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions

The Flexair Pro Jersey is injected with no-compromise features that bring the best technology to a free-flowing, durable mountain bike jersey. Maximum cooling comes from the ultra-light, moisture-wicking main body, while abrasion resistance and venting come care of carvico sleeves. Its tailored fit allows for plenty of unrestricted movement, leaving you free to confidently tussle with the rough stuff in this high-performance jersey.

A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate improves internal visibility MOUNTING SYSTEM - Velcro platform mounting straps and bungee hook mount ADDED BENEFIT - Zippered main compartments - Zippered side pockets - 3M triangle rear logos - Ultra-stiff polyurethane backing plate - Incorporated carry-handle - LED light clip - Volume 25 L / 1516 cu in (set) - Weight 830g / 1.83 lbs (set)

Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.