Protective/Armor

Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary

POC's Joint VPD 2.0 Knee pads offer serious protection that is just shy of full-on DH pads. They use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong, even in the event of a tumbling crash.

Hard shell performance, soft shell look and feel. - Open-back construction; no shoe removal necessary - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Foam padded side walls offer additional coverage - Integrated stabilization pad centers the knee and ensures 'stay-put' fit - Branded rubber grab tab closures

POC's Joint VPD 2.0 Elbow pads offer serious protection that is just shy of full-on DH pads. They use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong, even in the event of a tumbling crash.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, .25 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

- Featuring D30 high performance shock absorbing foam - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Woven upper elastic strap for personalized fit and lower Neoprene comfort band - Branded rubber grab tabs

- Softshell look and feel, but with a high impact shell under 600 denier nylon - Open-back design; no shoe removal necessary - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Foam padded side walls offer additional coverage

With the Flow Evo+ elbow guard, iXS provides super thin, light and comfortable elbow protectors. Developed with mountain bike legend Hans Rey, the pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ iXS introduce product properties like exchangeable padding and structurally improved AeroMesh of the newest generation, offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

With the Flow ZIP knee guard, iXS provides super thin, light and comfortable knee protectors. According to its name the Flow ZIP features an elastic zip FlexZip which simplifies putting them on and off. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow ZIP iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Flexzip, Stretchable Zipper - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

Protect your little rider with Strider's Knee And Elbow Pad Set. These tough pads boast premium hard plastic outer shells and Velcro straps to keep them securely in place.

Consider yourself one of the lucky ones if you’ve felt the thrill of annihilating the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Elbow Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

Consider yourself one of the lucky ones if you’ve felt the thrill of annihilating the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Elbow Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

Specialized's Atlas Knee Pads protect XC and trail riders from abrasion and minor impacts while maintaining a sleek fit for mobility. The custom formed, anti-shock foam pad provides protection while remaining lightweight and flexible, making the pad equal parts comfortable and confidence inspiring. This slip-on protector incorporates an extra tall cuff to keep the pad comfortably in place while pedaling and helps protect in the event of a minor impact. - Custom-formed pad shape with anti-shock foam delivers efficient protection. - Extra tall elastic cuff with silicone grippers ensures a secure, comfortable fit. - VaporRize body materials transfer moisture away from the skin and regulate temperature. - Articulated slip-on construction with open-back design provides pedaling comfort and a secure fit.

With the Flow Evo+ knee guard, iXS provides super thin, light and comfortable knee protectors. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

The Enduro Pro Elbow guard offers our highest level of protection in an ultra-light pedal-friendly design. The slip-on design with flexible impact-absorbing Fox F3 Armor provides you with minimal restrictions and maximum benefits. - Impact-absorbing foam provides full coverage & unrestricted range of motion - CE-certified coverage using Fox's proprietary F3 Armor - Moisture-wicking, open stretch mesh at back of guards for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Foam inserts are removable for easy washing - Certifications: EN1621-1 level 1 elbow including high & low conditions

- Removable D30 High performance shock absorbing protective foam at shoulders and spine - Custom Heat-Moulded foam chest piece - Works in conjunction with leading neck braces - Strategic fabric mapping: Highly durable dense mesh throughout the core ensures second skin super fit to keep targeted protection in its place and allows for maximum venting - Lycra stretch panels are integrated with flatlock seam finish to ensure mobility and comfort through the athlete's full range of motion - Sizing is built for snug fit

Consider yourself one of the lucky ones if you’ve felt the thrill of soaring down the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Knee Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep you cool and dry, even on hot summer days. And, it's antimicrobial so it doesn't absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized

- Same knee construction as the Ambush pad with just enough of an extension to put an end to pedal bite - Open-back construction means no awkward shoe removal on the trail - Featuring D30 high performance shock absorbing foam - Additional EVA foam extension saves shins from pedal bite - Proven Race Face open-back construction; no shoe removal necessary - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Foam padded side walls offer additional coverage - Branded rubber grab tabs

The Launch Pro Elbow guards are trusted by some of the world's best riders. For 2019, they have been fully redesigned with CE certifications and flexible, impact-absorbing F3 Armor. They give you the confidence to attack even the most aggressive trails. They combine the comfort of soft slip-on style guards with the added security of hook-and-loop adjusters, so you get the perfect marriage of comfort and protection. - Impact-absorbing Fox F3 Armor conforms to the body for a full range of motion - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability - EN1621-1 level 1 CE certification

The Launch Pro Knee guards are trusted by some of the world's best riders. For 2019, they have been fully redesigned with CE certifications and flexible, impact-absorbing F3 Armor. They give you the confidence to attack even the most aggressive trails. They combine the comfort of soft slip-on style guards with the added security of hook-and-loop adjusters. So you get the perfect marriage of comfort and protection. - Impact-absorbing Fox F3 Armor conforms to the body for a full range of motion - Pre-curved ergonomic fit - Slip-on fit with hook and loop adjuster - Perforated neoprene offers comfort & breathability - EN1621-1 level 1 CE certification

The Launch Pro Knee/Shin guards are trusted by some of the world's best riders. For 2019, they have been fully redesigned with CE certifications and flexible, impact-absorbing F3 Armor. They give you the confidence to attack even the most aggressive trails. They combine the comfort of soft slip-on style guards with the added security of hook-and-loop adjusters, so you get the perfect marriage of comfort and protection. - Impact-absorbing Fox F3 Armor conforms to the body for a full range of motion - Anatomically-shaped & asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability - Certifications: EN1621-1 level 1 CE certification

Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - Silicone patch at shin eliminates slippage - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only

Specifically designed with the growing Enduro scene in mind, the Indy Leg combines the unrestricted mobility of the Race Face Charge Leg with the additional impact protection of the T5 Evo. Second-skin Butterfly Mesh sleeve with targeted D30 high performance shock absorbing protective foam knee. Protection you can trust on rowdy descents built into a minimal sleeve for unlimited range of motion while climbing. - Lycra and butterfly mesh sleeve offers second skin fit - Targeted D30 high performance shock absorbing impact foam knee coverage - Woven elastic top strap with Velcro closure for personalized adjustment - Silicone gripper along inner top opening ensures "stay-put" fit - Silicone patch at shin eliminates slippage

The Enduro Pro Knee guard offers our highest level of protection in an ultra-light pedal-friendly design. The slip-on design with flexible impact-absorbing Fox F3 Armor provides you with minimal restrictions and maximum benefits. - EN1621-1 level 1 knee including high & low conditions - Impact-absorbing foam provides full coverage & unrestricted range of motion - CE-certified coverage using Fox's proprietary F3 Armor - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Foam inserts are removable for easy washing - Certifications: EN1621-1 level 1 knee including high & low conditions

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.