Feature Items

- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle

Bring along the essentials with the Hot Laps 1L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. - Breathable air mesh back panel - Deployable side water bottle pocket - Internal organization - Padded, fleece-lined phone sleeve - External attachment straps

Replacement SWAT MTB Tool. - Made with hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes slotted screwdriver, 3, 4, 5, 6, and 8mm Allen keys, and T25 Torx. - Please note that this does not include a storage cradle to attach to a frame or cage.

The Salsa EXP Series Top-Load Dry Bag is tailored to fit our Anything Cradle, attached via a pair of our EXP Series Rubber Straps. The bag holds all of your bikepacking essentials and opens from the top to keep a fixed width for easy on-the-bike loading. Fully welded construction, maximum versatility, and hook-and-loop points for ease of attachment make this supremely useful dry bag a key part of any bikepacking setup. - Air purge valve for compression - Roll-top bag opens at top and is fixed-width for easy loading when mounted on the bike - Slots and hook-and-loop simplify bag installation - Strap slots help keep bag from moving side to side when installed - Welded design with waterproof materials

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

The Purist MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. 100% leak-free. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink, and materials. - Available in 22oz and 26oz Purist Bottles.

For riders looking for comprehensive coverage to protect high-risk areas of a dual-suspension MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models and sizes - Designed around mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension MTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount is designed to fit with the Hixon iC cockpit for perfect integration on your trail or Enduro setup. - Fits Hixon iC combo, XR & FL stems - Alloy construction angle adjust - Wahoo insert available separately

Perform at your highest potential with GU Energy Gel. The 3:1 ratio of maltodextrin and fructose spares your limited glycogen stores with a combination of slow and fast-absorbing carbohydrates. The electrolytes sodium and potassium are just what your legs crave to stay firing properly. Branched-chain amino acids speed recovery and reduce muscle damage, and of course the delicious flavors go down easy.

Designed for Fat and Semi Fat tire bikes, the Big Bore packs massive volume per stroke and a unique head that still works with winter gloves on - Oversized press-on Schrader and Presta head won't accidentally remove valve cores and can be easily used with thick gloves. - Flexible hose attachment allows for aggressive pumping without fear of damaging valve stems. - Inverted barrel design allows for high volume in a compact size. - Coarse machined aluminum barrel for extra grip. - Water bottle boss mount with elastomer band included. - Max pressure: 50psi (3.5bar) - Volume per stroke: 90cc

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Revelation RL A1 (2018+)

Ounce-for-ounce, the Main Stray Goggles are the best value on the market and feature our Variable Lens System (VLS). VLS makes your goggles compatible with both standard lenses (stock) and injection molded lenses (sold separately) within the same frame. With an expansive viewport, triple-layer foam, and tear-off lens functionality, they are a heavy hitter and light on the wallet. - All-new design offers best-in-class viewport for unparalleled vision - Variable Lens System (VLS) design allows transfer of standard and injection molded lenses in the same frame - 3-layer face foam with fleece liner - Lexan lens offers UV protection - Strap mounted third tear-off post - Non-slip silicone strap - Microfiber goggle bag included - Clear Lexan lens

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.

Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.

Light and Motion Seca Comp 2000, with a perfect combination of high power in a compact, two-battery integrated design, is able to achieve a powerful output without quickly fading. A penetrating LED array gives a powerful spot beam in conjunction with a diffused flood beam ideal for both road and trail use to provide an exceptional range of vision for rides. Amber sidelights and a daytime pulse mode ensure road visibility and a secondary button allows the side lighting to be turned off when on the trail. - 2000 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs - Sealed, waterproof design tested to 1 meter for all conditions reliability - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels - Run times: 1:30 – 9 hrs over 6 modes

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes. - Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle. - Includes stamped aluminum bracket that can be bent to adjust the light's angle. - This mount features a snap-in, breakaway mount to protect light if snagged. - Will only work with Specialized saddles with SWAT-compatible mount holes in the base. - Includes mounting hardware.

The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware. - Engineered fender set with extended, research-based length for superior water protection. - Lightweight, yet highly durable multi-material design. - Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y - Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting. - Heat-treated, lightweight aluminum fender stays with stainless steel hardware.

CLIF BLOKS Energy Chews provide quick, chewable, energy to athletes while training and racing. BLOKS come in 33 calorie cubes, with sleek and portable packaging, making it easy to customize and track caloric and electrolyte intake during long outings and races.

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

Attach this handy multi-tool to your Specialized SWAT-equipped water bottle cage (sold separately) and hit the trails secure in the knowledge that your tools are close at hand. The tool features hardened steel bits with an anti-rust coating and the plastic tool cradle holds securely and rattle-free thanks to the two attachment points.

Hip pack storage solution for hydration and riding essentials. - Low profile 1.5L HydraPak® reservoir - 2L Main pocket with divider to keep your essential items organized - Dual collapsable water bottle holsters for additional hydration options - Easy access tool storage with dividers - Wicking fabric next to skin keeps you cool and dry - Reflective details provide improved visibility - 600D Polyester Ripstop-PU Face

The Purist MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. - 100% leak-free. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

- Constructed using a 6mm aluminum rod - Embossed MSW logo

Real endurance fuel - Rock-solid sustained energy - No sugar crash - Easy to digest, no GI distress BENEFITS: Unlike other similar-looking products on the market, Hammer Gel’s complex carbohydrates, all-natural ingredients, and pH-balancing formula are easily digestible, and provide quick-acting yet long-lasting energy in a convenient, tasty, concentrated form. The addition of branched-chain amino acids helps to prevent muscle tissue breakdown while reducing fatigue. - Hammer Flask holds 5-6 servings. FREE flask with purchase of Hammer Gel jug! - Only Espresso and Tropical flavors contain caffeine, 50 mg for Espresso and 25 mg for Tropical per serving. - All Hammer Gel flavors are vegan except Nocciola. - Kosher Certification

Whether visiting friends, enjoying a ride on city roads, or doing some errands with the eBike, the PowerPack 400 delivers the power you need. The lightweight lithium-ion battery is easy to install and remove or can simply be charged using the charging socket on the eBike. Its long service life, compact and easy-to-install design mean that the PowerPack 400 is not only reliable, but also strong on performance. The PowerPack 400 comes as a frame or rack model for all eBike product lines.

Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

A brilliant idea for all-season, all-weather riders: the bike bags in the Ortlieb High Visibility Line make it easier for other people to see you while you're out there on the streets. This is because all High Visibility bags not only come with reflectors, but are themselves one big reflector. The waterproof bags are made with a polyurethane-coated Cordura fabric that is woven through with a high-luminosity reflective yarn in neon yellow and black. That gives Ortlieb High Visibility bags an added safety feature in twilight conditions and in the dark of night. The Back-Roller High Visibility is the ideal bike bag for those who prefer the convenience of the roll closure system. The durable, waterproof, dustproof, abrasion-resistant and high quality fabric ensures optimal protection for your gear. Equipped with the sophisticated QL2.1 system with self-closing hooks, the Back-Roller attaches to your bike in a flash. And simply use the easily detachable shoulder strap to carry your bike bag comfortably once you've arrived at your destination. - Classical rear pannier (single bag) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - As a pair can be combined with the Ortlieb Rack-Pack size 24L or 31L on the rack - Comfortable to carry with shoulder strap (can be taken off) - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Maximum-security ground and wall anchor, providing a secure point for locking your bike at home, garage or office. ANKR’s unique design means that it provides maximum security when mated with a lock (try with a Hiplok maximum-security chain lock) but can be easily moved should you relocate or want to store your bike elsewhere. Made from premium hardened-steel with bolts included, ANKR is rated Gold level security for both bicycles and motorbikes. ANKR is easy to install and suitable for inside or outside use.

The Purist WaterGate Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Simple hands-free open and close valve: Nothing to turn. - 100% leak-proof top locks down for transport or mixing powdered drinks. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design—even when the valve is open. - Rubber over-molded on the outside of cap for easy, sure grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.

Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB

Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Clif Bars are a delicious source of healthy energy and are full of essential vitamins and minerals. Made with high-quality, organic ingredients, Clif Bars are a perfect go-to food whether you’re on the bike or just need a quick snack at the office. They contain 10 grams of protein and are made with real fruit, nuts, and whole grains. They contain no hydrogenated oils or artificial flavors.

Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

- End link locking point for extensive holding power - 4-sided 3t manganese steel chain links - 4 digit resettable combination over 10,000 codes - Patent pending lock head design - Combo Safe Program - Product dimensions: Length 90cm - Product weight: 3.75 lbs

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

The BBT-30.4 Bottom Bracket Bearing Tool Set is designed and built to install and remove the bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems. The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings in the bottom bracket shell. The included BB30 bearing remover works from inside the shell to easily push out bearings.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

At 32 Grams the Race Mount is 33% lighter than the “standard” Wahoo Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt, Wahoo Mini - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

Created for daily use before and during training and competition, the new GU Energy Stroopwafel delivers all the nutrients needed to power your performance: quality carbohydrates (immediate and long-lasting energy from complex and simple carbohydrates), essential amino acids (prevent mental fatigue and repair muscle damage during long-duration activities), and electrolytes (replenish what’s lost when you sweat). The Stroopwafel is made with a layer of delicious syrup between two thin wafers, and it’s individually packaged to make it portable and easy to take on a ride or run.

No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps

Add some flair and fun to kids' bikes with MSW Squeeze Horns. - Fits standard 22-26mm diameter handlebars - Approximately 3" wide