Accessories

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

The BBT-30.4 Bottom Bracket Bearing Tool Set is designed and built to install and remove the bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems. The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings in the bottom bracket shell. The included BB30 bearing remover works from inside the shell to easily push out bearings.

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.

Professional quality heat-treated steel with hand-saving no-slip plastic grip and ergonomic design for maximum leverage and comfort. - Precision cut for an exact fit with no slippage - Lifetime warranty on all Pedro's tools

Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 50% and 75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. - Three point chain wear tool design properly isolates pin wear from roller wear - Includes a chain hook tool for simplifying chain removal and installation, and a chainring nut wrench for removal and installation of chainrings - Two chain wear indicators: 50% and 75% - Improved user instructions are laser etched on the tool

- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.

Planet Bike's Beamer 3 Headlight boasts 3 super-bright white Nichia eXtreme LEDs with steady and flashing modes to provide excellent visibility. And, the soft-touch switch makes it easy to change settings, even with gloves on. The Beamer also features a quick-release handlebar mount that attaches in seconds without tools. Plus, the included 2 AA batteries deliver run times of up to 100 hours.

You only need a couple of seconds to protect yourself and your bike from wet weather. Planet Bike's Clip-On Fenders are made of a durable all-weather polymer so never again will you come back from a ride with a dirt streak up your back. And, because they're clip-ons, you can easily remove the fenders when it's dry.

Planet Bike's Snack Sack attaches to your top tube to keep your gear within easy reach. It's made of tough material and has a padded, white interior to make it easy to see your things. Its 43 cubic inches of capacity handle all your essentials. It's also got a dual zipper for easy access and reflective piping, too. Dimensions: 7 x 3.5 x 2 inches

Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.

Maximize your visibility with this amazing taillight. Planet Bike's Superflash aims a one-watt Power LED plus two red LEDs for light that can be seen for up to one mile! The ultra-compact case is weatherproof, light and durable. And, the Superflash Turbo includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Converts quill style forks to use threadless stems.

- Hip pack holds water nutrition tools spare tubes etc and is ideal for longer rides - Main pocket folds out to make a tool bench for trailside repairs - Padded water resistant cell phone pocket plus side pockets

Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh tailgate rub - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

For riders looking for comprehensive coverage to protect high-risk areas of a dual-suspension MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models and sizes - Designed around mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension MTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

RockShox 30mm Seal Kit

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Revelation RL A1 (2018+)

50 HOUR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, GREASE/OIL) - DELUXE C1+/SUPER DELUXE C1+/SUPER DELUXE FLIGHT ATTTENDANT C1+ (2023+)

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

- Easy to use tool for checking cassette wear

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade

Designed to be used with XX and XX SL D1 power meters with threadmount rings, this tool is required for proper chainring removal. FEATURES - Includes backup pin - Required for threadmount chainring removal on Transmission Power meters

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB

The Salsa EXP Series Top-Load Dry Bag is tailored to fit our Anything Cradle, attached via a pair of our EXP Series Rubber Straps. The bag holds all of your bikepacking essentials and opens from the top to keep a fixed width for easy on-the-bike loading. Fully welded construction, maximum versatility, and hook-and-loop points for ease of attachment make this supremely useful dry bag a key part of any bikepacking setup. - Air purge valve for compression - Roll-top bag opens at top and is fixed-width for easy loading when mounted on the bike - Slots and hook-and-loop simplify bag installation - Strap slots help keep bag from moving side to side when installed - Welded design with waterproof materials

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps

A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

SILCA Super Secret Chain lube started out as a project to develop the fastest hot-melt wax lubricant available more than a year ago. Josh has been recommending Hot Melt Wax and helping Pro cyclists and triathletes wax chains for years and wanted to bring his lubricant formula to our customers, the challenge was how to consistently melt, dip and agitate the chain across different crockpot designs and temperatures.  The project took a fascinating turn from the world of IndyCar when Josh was introduced to a group that had developed a technology to put micro-scale wax powders into a solution that was quick-drying and forms a coating that is indiscernible from hot melt dipping. The combination of air-drying liquid wax and Tungsten Disulfide would quickly prove to beat all currently available hot-melt waxes in friction testing while being much faster and easier to apply. Best of all perhaps is that this formula would prove to be very environmentally friendly, utilizing 4 different types of wax, nanoplatelets of WS2 (Tungsten Disulfide), and mild alcohol to act as a carrier. This same alcohol is used in the SILCA Gear Wipes, making them a perfect product to clean and remove Secret Chain Lube. - 4 oz. and 8 oz. bottles with the precision applicator tip for dripping on your chain, or 12oz lube (leaving room for your chain) for dipping the chain - The chain should be VERY clean and dry before applying - Apply according to video and let dry for AT LEAST 12 hours for optimal results, 24 hours if applied in cool or humid weather conditions! We recommend applying the lube AFTER your ride so it's ready for next time! - NOTE: Over time the WS2 will begin to settle to the bottom of the bottle, shake well before using!

An Eco-friendly bubble bath for your bike. Make micro-scratches a thing of the past by allowing the advanced surfactants to lift the dirt and grime from your frame. Scrub with a sponge or soft brush, rinse with water. - Eco-friendly and less harmful formulas - Encapsulates dirt to prevent scratching as it is removed from the surface - Clean rinsing to leave no residue - Cherry Glow Scent - Heavy concentrate for ultimate cleaning power - 16 oz. bottles - Additional equipment needed: water bucket, sponge/buff

Eliminate oil and dirt from your drivetrain in 3-5 minutes and watch the cleaner foam to a purplish-red color as in encapsulates and removes that oil and dirt. Eliminates brake squeal and will not attack wax on paint or drivetrain! - Ecapsulates and removes oils and grease - 16oz spray bottle - Cinnamon scent - Clean Rinsing

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams

When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is! Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x). - 500g / 17.6oz pouch - The chain should be VERY clean and dry before applying

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm