Searching...
 
 
 
 
 
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Gender

Price

–   GO

Size

+ more sizes
 
> Bicycling > Wheels

Wheels

38 Results
Per Page 30 60
1 2 Next
Product Rating
 
5.0 stars
 (12 Reviews)
CycleOps Trainer Skewer
$12.99

CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine. [more]

Mavic 12 > 9.5mm Rear Axle Adapters
$10.00

On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. -… [more]

Mavic 20mm Front Axle Adapter - Crossmax ST/SX
$16.90

On today's MTB forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic Crossmax ST/SX front hub to use 20mm axle -… [more]

Mavic Rear Axle Adapter 12/142 (Center Lock)
$19.95

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts MTB rear hubs with Center Lock rotor mount to use 12mm axle with 142mm spacing - One pair of adapters required for… [more]

Odyssey HGS Spokes
$19.99

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX. [more]

WTB TCS Brass 34mm Valve Stems
$15.95

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. [more]

Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00 - $20.00

Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm. [more]

Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50

Replacement end caps for Stan's NoTubes rear hubs with XD Driver. [more]

Zipp Stainless Steel Track Front Skewer
$10.00

Zipp’s stainless steel front track skewer replaces your quick release skewer when it’s time to bring your speed weaponry from the road to the track. Tighten it down with a 5 mm Allen key and feel secure on the steepest banking. [more]

Strider Ultralight Replacement Wheel
$15.00

• Strong Custom Strider Rim • Durable No-Flat Tire • Tread pattern and bearings matches the ST-4, and will fit on any ST-Model [more]

WTB TCS Brass 46mm Valve Stems
$15.95

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. [more]

Mavic 135 > 142mm Rear Axle Adapters - Crossride
$16.90

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic Crossride rear hubs with 135mm spacing to fit frames with dropouts spacing of 142mm - One pair of adapters… [more]

Mavic 135 > 142mm Rear Axle Adapters - Crossmax
$16.90

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Crossmax rear wheels from 135mm to 142mm spacing - One pair required for each hub to be converted [more]

Odyssey Antigram Hub Guards
$19.99

Designed specifically for use with Odyssey's Antigram FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life [more]

Stan's NoTubes Rim Tape
$11.25 - $18.00

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha… [more]

Stan's NoTubes Tubeless Valve Stems
$16.00

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0… [more]

Spank Spoon 20 Front Hub QR Adaptor
$18.00

QR adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±26 Compatibility: SPOON… [more]

Kurt Kinetic Trainers Skewer
$15.00

Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width [more]

WTB TCS Rim Tape
$15.95 - $79.95

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims). [more]

SRAM X0 Hub Conversion Caps
$16.00 - $21.00

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type. [more]

Wheels Manufacturing Inc. CN-R040 Cone
$10.00

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm -… [more]

Wheels Manufacturing Inc. CN-R085 Cone
$10.00

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26… [more]

Wheels Manufacturing Inc. CN-R096 Cone
$10.00

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm -… [more]

Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $16.00

Whisky Parts Co. Tubeless Rim Tape. [more]

Whisky Parts Co. Presta Tubeless Valve Stems
$16.00

Tubeless valves for use with Whisky Tubeless rims and most other systems. - Steel valve stems for use with Whisky tubeless rims and most others - 35mm length - Fits up to an 8mm valve hole - Removable valve core - Sold as a pair [more]

Wheels Manufacturing Inc. Axle-01
$19.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 126mm spacing - Type:… [more]

Wheels Manufacturing Inc. Axle-03
$19.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 130mm spacing - Type:… [more]

Wheels Manufacturing Inc. Axle-04
$17.50

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type:… [more]

Wheels Manufacturing Inc. Axle-14
$13.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Solid Axle -… [more]

Wheels Manufacturing Inc. Axle-19
$13.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x… [more]

38 Results
Per Page 30 60
1 2 Next