Feature Items

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

The Salsa EXP Series Top-Load Dry Bag is tailored to fit our Anything Cradle, attached via a pair of our EXP Series Rubber Straps. The bag holds all of your bikepacking essentials and opens from the top to keep a fixed width for easy on-the-bike loading. Fully welded construction, maximum versatility, and hook-and-loop points for ease of attachment make this supremely useful dry bag a key part of any bikepacking setup. - Air purge valve for compression - Roll-top bag opens at top and is fixed-width for easy loading when mounted on the bike - Slots and hook-and-loop simplify bag installation - Strap slots help keep bag from moving side to side when installed - Welded design with waterproof materials

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together

Real endurance fuel - Rock-solid sustained energy - No sugar crash - Easy to digest, no GI distress BENEFITS: Unlike other similar-looking products on the market, Hammer Gel’s complex carbohydrates, all-natural ingredients, and pH-balancing formula are easily digestible, and provide quick-acting yet long-lasting energy in a convenient, tasty, concentrated form. The addition of branched-chain amino acids helps to prevent muscle tissue breakdown while reducing fatigue. - Hammer Flask holds 5-6 servings. FREE flask with purchase of Hammer Gel jug! - Only Espresso and Tropical flavors contain caffeine, 50 mg for Espresso and 25 mg for Tropical per serving. - All Hammer Gel flavors are vegan except Nocciola. - Kosher Certification

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.

Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.

Chamois Butt’r Original is a non-greasy skin lubricant developed by cyclists for use with all chamois. Chamois Butt’r isn’t just for cyclists! It lubricates, soothes, and softens the skin of all athletes who experience chafing. BENEFITS: - No greasy residue - Immediately improves comfort - Soothes already chafed or irritated skin - Rinses out of clothing and off of skin easily - Won’t damage or discolor technical clothing - No parabens, phthalates, gluten or artificial fragrances - To use: rub 1/6 to 1/3 ounce on your skin or chamois - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your frame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly with hook-and-loop fasteners. Two water-resistant zippered openings provide easy access to all your gear from either side. - Material: Polyethylene / nylon lightweight, durable, water repellent and stain resistant - Bag Attachment: Hook-and-loop fastener - Top Tube Diameter: Fits 45 - 66mm - Down Tube Diameter: Fits 38 - 70mm - Seat Tube Diameter: Fits 28 - 60mm Size - 3L: 37.5 x 12 x 6cm / 14.8" x 4.7" x 2.4" - 4.5L: 46 x 12 x 6cm / 18.1" x 4.7" x 2.4" - 6L: 54.5 x 13.5 x 6cm / 21.5" x 5.3" x 2.4" Weight - 3L: 277g / 9.77oz - 4.5L: 292g / 10.30oz - 6L: 337g / 11.89oz

Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

It's a place to return to after a long, exposed hike or your first ride of the season. Your base camp is where you can relax and relive the best (and worst) parts of your day. Reliable and crazy comfortable, our Basecamp sunglasses are prepped for whatever outdoor activity you have in mind. No-slip nose pads and temples keep them in place so they won't slip off when you start to sweat. They may look casual with their 6-base frame but they have a secret performance edge with ChromaPop™ lens options that let you see with amplified detail and enhanced color. Vision - ChromaPop lenses enhance contrast and natural color to make the details pop - 100% UV protection Fit / Integration - Medium fit, medium coverage - 6-base lens curvature provides a modest wraparound fit - Megol temple and nose pads provide nonslip grip so glasses stay put Frame - AutoLock hinges hold frames open for easy one-hand on and off

Clif Bars are a delicious source of healthy energy and are full of essential vitamins and minerals. Made with high-quality, organic ingredients, Clif Bars are a perfect go-to food whether you’re on the bike or just need a quick snack at the office. They contain 10 grams of protein and are made with real fruit, nuts, and whole grains. They contain no hydrogenated oils or artificial flavors.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Fingerprints and glossy marks are now a thing of the past. Matte Finish Detailer has been specifically developed for satin matte paints, matte finishes and matte vinyl wraps. The premium-grade formula will leave any matte surface with a streak and gloss-free protective finish that reduces dirt adhesion. - Quick to use spray developed specifically for matte finishes - Leaves a non-sticky, streak and gloss-free protective finish - Carbon Fiber safe - Biodegradable

- Water resistant 1000D material with YKK zipper - Interior division for all your essentials - Reflective logo, webbing to clip light - Angled straps achieve a low profile fit - No-snag Velcro and Amara leather limit abrasion - Length: 9 in, Width: 5.1 in, Depth: 3.7 in - Volume: 68.5 cu in

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

- Constructed using a 6mm aluminum rod - Embossed MSW logo

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

Perform at your highest potential with GU Energy Gel. The 3:1 ratio of maltodextrin and fructose spares your limited glycogen stores with a combination of slow and fast-absorbing carbohydrates. The electrolytes sodium and potassium are just what your legs crave to stay firing properly. Branched-chain amino acids speed recovery and reduce muscle damage, and of course the delicious flavors go down easy.