Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Front

SRAM 3.0 Front Derailleur (High-clamp, Dual-pull)
$16.99
Enjoy the ride with SRAM's 3.0 Front Derailleur. It provides crisp, precise front shifts for fast, smooth, and reliable shifting season in and season out.
Shimano Tiagra Front Derailleur
$32.99 - $41.99
Shimano's Tiagra Front Derailleur provides quick shifting. The clear-coated aluminum body and plated-steel cage are extra durable so you can enjoy smooth shifts mile after mile.
Shimano Sora Front Derailleur
$29.89 - $39.95
For quick, dependable shifting, look no further than Shimano's Sora Front Derailleur. Sora front derailleurs are compatible with dual-control road shifters and flat-bar style Rapidfire Plus shifters.
SRAM GX 2x10 Front Derailleur (High Direct-mount, Bottom-pull)
$35.00
SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM GX 2x11 Front Derailleur (Low-clamp, Bottom-pull)
$40.00
SRAM's low-profile GX 2x11 front derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 150 grams
Shimano CX70 Front Derailleur
$47.99 - $53.99
Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.
Shimano Deore XT Front Derailleur (Direct Mount)
$39.99
• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69
Shimano SLX 2x11 Front Derailleur
$29.99 - $30.99
- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g
Shimano Alivio Front Derailleur
$28.59
Shimano's Alivio Front Derailleur features wide pivots and a rigid cage for fast shifting and trail-worthy durability. This 9-speed compatible derailleur also gives you clearance for mud guards or wide tires.
Campagnolo Athena Braze-On Front Derailleur
$60.00
Campagnolo's Athena Front Derailleur is compatible with both standard and compact cranksets. Its steel cage moves the chain effortlessly between the chainrings and it features an anti-friction coating for quiet, sublimely smooth shifting.
K-Edge Cross Single XL Chain Catcher
$69.99
The Cross Single XL Chain Catcher coupled with a K-Edge Ring Guard is the ultimate lightweight set-up for a single ring cyclocross set-up. The adjustable cross XL foot mounts to its own CNC sculpted lightweight clamp and adds additional protection to a single ring set-up by preventing the chain from jumping up or off the ring. - Material: 6061 T6 CNC machined Aluminum - Fitment: All frames with a round mounting area - Clamp Sizes: 31.8mm, 34.9mm - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
MRP Decapitator Direct Mount Cover
$29.95
- Cover up those unfinished and unused FD mounts with MRP cover plates - Offered in Decapitator version with built-in bottle opener - Alloy with matching alloy fastener, 12g - Made in Grand Junction, CO USA
Campagnolo Veloce Braze-On Front Derailleur
$59.99
Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.
SRAM X5 3x9 Front Derailleur (Low-clamp, Dual-pull)
$26.00
SRAM's X5 Front Derailleur is stiff and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.
Shimano Deore M6020 Double Front Derailleur
$37.99 - $39.99
Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed
Shimano Ultegra Front Derailleur
$48.99 - $69.99
If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.
Shimano Deore XT Front Derailleur (E-Type)
$39.99
• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69 • BB Mounting Plate : E-Type
Shimano Deore XT Dyna-Sys 10-Speed Double Front Derailleur (Down Swing, Direct Mount)
$38.99
Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and uses wide parallel pivots to provide fast, smooth, and reliable front shifting. This derailleur uses direct mounting and is specifically optimized for 2x10 set ups.
SRAM X9 2x10 Front Derailleur (High-clamp, Bottom-pull)
$50.00
SRAM's X9 Front Derailleur sports a stiff steel cage and a cutout design for exceptional durability with minimal weight. It provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
Shimano Sora Triple Front Derailleur
$31.99 - $32.99
- Model Number: FD-R3030 - Series: SORA - Top Gear Teeth: 50T - Chain Stay Angle: 63-66 - Chain Line: 45 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes
SRAM RED eTAP Electric Aero Kit
$1,659.00
Step up to the next generation in shifting with SRAM's wireless RED eTAP electric aero drivetrain kit. The aero kit includes Blip shifters, derailleurs, battery charger and USB stick. Brake levers not included. Each kit contains: - 4x SRAM eTAP 650mm Blip remote shifter buttons - SRAM eTAP Blip Box - SRAM RED eTAP wireless front and rear derailleurs - SRAM eTAP batteries - Battery charger - USB stick - Quick-start guide
K-Edge Cross Double XL Chain Catcher
$69.99
The Cross Double XL clamps independent of the front derailleur and is the long reach version of our popular cross double chain catcher. The adjustable cross XL foot mounts to its own CNC sculpted lightweight clamp. - Material: 6061 T6 CNC machined Aluminum - Fitment: All frames with a round mounting area - Clamp Sizes: 31.8mm, 34.9mm - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Campagnolo Chorus EPS Braze-On Front Derailleur
$400.00
Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g
Campagnolo EPS Front Derailleur Stiffener
$82.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Super Record Braze-On S2 Front Derailleur
$190.00
Campagnolo's S2 System Super Record Front Derailleur handles the shifting duties of the world's top pros and is sure to work wonders for you, too! It features an aluminum internal cage plate and an external carbon one for incredibly quick shifting and a sleek look. The super-light cage along with the aluminum body and titanium hardware gives you one of the lightest front derailleurs you can buy. It's versatile too, working with both standard and compact cranksets. The S2 system features an additional component on the derailleur that increases stiffness. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Max ring (teeth): 55T - Double or triple: Double - Only compatible with 2015+ Campagnolo Chorus, Record, and Super Record - Weight: 74g
SRAM X9 3x10 Front Derailleur (Low Direct-mount, Bottom-pull)
$47.00
SRAM's X9 Front Derailleur sports an aluminum body, a stiff steel cage and a cutout design for exceptional durability with minimal weight. It provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM X0 2x10 Front Derailleur (Low-clamp, Bottom-pull)
$69.00
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.
SRAM X0 3x10 Front Derailleur (High Direct-Mount, Top-pull)
$77.00
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.
SRAM X0 3x10 Front Derailleur (High Direct-Mount, Top-pull) 38/36T
$77.00
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.
SRAM XX Front Derailleur (Low-clamp, Top-pull)
$126.00
When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Front Derailleur is crafted from forged aluminum and steel to ensure a ridiculously low weight, while still delivering the precision and durability SRAM is known for. Plus, this beauty has been painstakingly engineered to throw down the fastest and smoothest front gear changes you've ever experienced.
Page 1 of 5 Next page