Skip to main content

Blue Wheel Winter Gravel Series debuts with Scott's classic WTF ride on November 10! For more details, visit our group rides page.

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cables

$10.99
Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.
$8.99 - $9.99
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10
$2.99 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$6.99 - $49.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$1.00
Extend housing runs using these double-ended junction end caps.
$29.99
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
$3.00
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$14.99
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
$22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
$0.15 - $69.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$11.99 - $17.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
$0.50 - $89.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
$0.75 - $44.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips
$2.50 - $71.99
Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance - Linear strand construction for compressionless performance - Appropriate for Teflon coated cables as well as steel and galvanized - 4.0mm outer diameter solid colors; 4.5mm OD braided colors - Length: 10m
$10.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road , Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$0.50
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Page 1 of 1