Filter By:
- Parts & Accessories (7)
- Trainers (1)
- Smart Trainers (3)
- Show More Sizes
- Show Fewer Sizes
Indoor Cycling
$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$69.98
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides.
- Impervious to sweat and spilled water bottles.
- Gripping texture keeps the KICKR in place, so you can focus on your ride.
- Material helps to reduce noise and make the KICKR even quieter.
- Beveled edge keeps the mat in line with the floor.
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$69.99
KICKR XDR Freehub body allows you to use your KICKR with the new SRAM AXS drive train system. This kit includes a 1.8mm spacer for XD compatibility.
Compatibility: KICKR '18, v5, v6, MOVE and KICKR CORE
$219.99
No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it.
Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking.
- Magnetic resistance unit provides a quiet and frictionless ride.
- Linear resistance boosts workout intensity to match each pedal stroke and gear click.
- Features five adjustable levels of resistance
- Compatible with Zwift and other indoor training apps
$299.00
The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions.
- With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts.
- The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle.
- Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed.
- Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips.
- Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow.
- The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.
$379.99
A Killer Training Combo
What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer.
Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat.
Product Features
- Fluid resistance unit provides a quiet and consistent ride.
- Progressive resistance offers the widest resistance range and road-like feel.
- Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps.
- ANT+ USB and BlueGiga USB sold separately.
- Includes one month subscription to Rouvy virtual training app
In the box:
- Fluid² Smart Equipped Bike Trainer
- Dual-band magnetless speed sensor
- Fluid² is the best-selling trainer in the USA.
- Fluid resistance unit creates optimal road-like feel.
- Fluid resistance unit provides a quiet and consistent ride.
- Noise level at 20 mph is super quiet 64-68 decibels.
- Large, individually precision-balanced flywheel allows for improved road-like feel.
- Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer.
- Eccentric leveling feet allow for easy adjustment on uneven surfaces.
- Comes on the foldable Classic frame with spring loaded, bolt-action lever.
- Precision-machined alloy roller reduces tire wear and slippage.
- Features clutch knob for perfect roller-to-tire tension each ride.
- 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire.
- This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm.
- Trainer tire recommended.
- Compatible with indoor cycling apps.
- Trainer is tested to the combined weight (rider and bike) of 300 lbs.
- Optional thru-axle adapter available for 142x12mm and 148x12mm bikes.
- ANT+ USB and BlueGiga USB sold separately.
- Formerly branded as CycleOps Fluid² Smart Equipped
$699.00
The latest innovation from Wahoo will literally take your indoor training to the next level! KICKR CLIMB indoor grade simulator is designed to work exclusively with the Wahoo KICKR Smart Trainers and when paired, it will add physical grade changes to your indoor training. The KICKR CLIMB is compatible with Third Party Apps, so whether riding a virtual course or performing a structured workout, KICKR CLIMB blends ascents and descents with resistance changes for a truly immersive indoor training experience. The world isn’t flat; now, neither is your ride!
Features
- Real-time grade changes
- App controlled
- 20% maximum incline
- -10% maximum decline
- KICKR smart trainer compatible
- KICKR desk compatible
- Wahoo ELEMNT bike computer compatible
- Direct proximity pairing
- Locked and unlocked climbing modes
- Manual grade adjustments with remote control
- Quick release and thru-axle bike compatibility
- LED indicator lights
- Professional grade durability
- Third party app compatibility
$1,299.99
With the addition of lightning fast WiFi, KICKR continues to stay ahead of the pack as the smart trainer that gives you the most ways to connect, compete and train indoors.
- +/- 1% power accuracy
- Side-to-side movement
- Auto-calibration and firmware updates
- Virtually silent operation
- Measures speed, distance, power and cadence data
- NEW - WiFi connectivity for faster, stable data transfer
- NEW - ERG Easy Ramp gets you back in action
- NEW - Odometer tracks total mileage
Page 1 of 1